13577429 13507129 Equinox Impala 3.6L 3.0L Equipment Flex Fuel Sensor Fuel level sensor
Product Description:
Introduction
The FFS is intended for operation in North American/South American/Southeast Asian countries that use a blend of gasoline and ethanol (anhydrous and/or hydrous ethanol) fuel for vehicle operation. The FFS is a component in the Fuel Storage and Handling Subsystem. The FFS will determine and report the percent total ethanol of the fuel.
Ethanol content is dynamically updated in ECU in order to adapt engine parameters to operate with the new fuel. In order to avoid potential damages to engine and components due to wrong ethanol content.
Mechanical Mounting Requirements
Installation at any location on chassis from fuel tank to engine compartment including engine mounting, with environmental temperature restricted to +125°C maximum, -40°C minimum.
Sensor must be installed in the low pressure side of the fuel line. Fuel can flow in either direction through the sensor fuel tube (measurement cell). Installation after the fuel filter, to eliminate any larger particles in the fuel from plugging the sensor.
If sensor is installed in return fuel line, consider draining of line when vehicle is turned off, which will result in a delay in correct signal output until fuel has reached sensor.
Depending on available free space to install the sensor, Bometec has learned from other customers the following: – Sensor horizontal installation, whereby some customers are mounting sensor at slight angle, to avoid entrapped air in the pipe.
Features:
- Product Name: Flex Fuel Sensor
- Warranty: 1 Year
- Storage Temperature: -40℃~+125℃
- Size: 2.5in X 2.5in X 1.5in
- Pressure Range: 0-100psi
- Material: Stainless Steel
- Special Features: Flexible Fuel Measurement Device, Flexible Fuel Monitoring Solution, Flexible Fuel Sensor
Technical Parameters:
| Car Fitment |
Model |
Year |
Engine |
| Chevrolet |
Equinox |
2010-2011 |
3.0L 182cid |
| 2010-2012 |
3.0L |
| 2011-2012 |
3.0FLEX |
| 2012 |
3.0L 182cid |
| 2013-2017 |
3.6FLEX |
| IMPALA |
2012 |
3.6L |
| 2012-2015 |
3.6L |
| 2012-2016 |
3.6FLEX |
| 2015-2016 |
3.6BI-FUEL |
|
Applications:
The Oetex Flex Fuel Sensor is a flexible fuel measurement device designed to provide fuel monitoring solutions for a variety of applications. With a response time of 0.5 seconds, a pressure range of 0-100psi, and an operating temperature range from -40℃~+125℃, this fuel detection system is perfect for a variety of industries. The system is compact in size, measuring 2.5in X 2.5in X 1.5in, and is designed to operate within a wide range of temperatures, from -40℃~+125℃. With its flexible fuel detection capabilities, the Oetex Flex Fuel Sensor is the perfect monitoring solution for any application that requires reliable fuel flexibility.
Customization:
Oetex Flex Fuel Sensor (FFS-001)
Oetex Flex Fuel Sensor provides an effective and reliable fuel flexibility monitoring solution for our customers. Our Flexible Fuel Sensor (FFS-001) is able to measure fuel pressure range from 0 to 100psi and has a wide storage and operating temperature range from -40℃ to +125℃, ensuring it is suitable for almost any application.
Our Flex Fuel Sensor is a cost-effective and easy-to-use solution to monitor fuel flexibility. It is also backed by a 1-year warranty for your assurance.
Support and Services:
Flex Fuel Sensor Technical Support and Service
We provide technical support and service for our Flex Fuel Sensor products. Our team of experts can help you with any questions or issues you may have regarding our products.
Here are some of the ways we can help:
- Provide technical advice on installation and use of the Flex Fuel Sensor
- Address any compatibility or performance issues
- Provide troubleshooting support
- Replace defective or damaged parts
- Provide technical information and documentation
If you have any questions or need help with your Flex Fuel Sensor, please contact us and we will be happy to help you.
Packing and Shipping:
Packaging and Shipping for Flex Fuel Sensor:
- All flex fuel sensors are packaged in a securely sealed, waterproof container.
- The sensors are shipped via airfreight in a temperature-controlled environment.
- Each shipment is inspected prior to departure to ensure the quality and safety of the products.
- All shipments are insured for the full value of the products.
- Customs clearance is handled by the shipper.
FAQ:
Q&A for Oetex Flex Fuel Sensor
Q1: What is a flex fuel sensor?
A1: A flex fuel sensor is a device that measures ethanol content in fuel and helps detect the percentage of ethanol in the fuel mix.
Q2: What is the purpose of a flex fuel sensor?
A2: The purpose of a flex fuel sensor is to measure the amount of ethanol in fuel, so that the engine can be adjusted and tuned accordingly.
Q3: What are the benefits of using a flex fuel sensor?
A3: The benefits of using a flex fuel sensor include improved engine performance, reduced emissions, greater fuel economy, and increased engine life.
Q4: How does the Oetex flex fuel sensor work?
A4: The Oetex flex fuel sensor is designed to accurately measure the ethanol content in fuel in order to optimize the engine's performance. The sensor utilizes special algorithms and sensors to detect the fuel mix and provide feedback to the engine control unit.
Q5: Does the Oetex flex fuel sensor require any special installation?
A5: No, the Oetex flex fuel sensor is a plug and play device and requires no special installation. It is compatible with all OBD-II compliant vehicles.
Your message must be between 20-3,000 characters!
